Table of Contents
ToggleCanon g2010 Setup
System Requirements For Canon G2010 Setup
You have to first check the compatibility of the device with the printer to connect it and give printing commands directly. Canon G2010 is compatible with various devices and OS as explained below:-
- Operating System: Windows 7, Windows 7 (64 Bits), Windows 8.1, Windows 8.1 (64 Bits), Windows 10, Windows 10 (64 Bits), Windows 11.
-
- System Requirements: Windows 7 SP or later, Windows 8.1 (32 bits and 64 bits), Windows 10 (32 bits and 64 bits)
-
- Operating Environment: Temperature (41 °F to 95 °F), Humidity (10 to 90 % RH)
How to Setup Canon g2010 Wireless Printer
Start the Printer The very first step is to assemble all the parts of the printer in place. Peel off all the protective tapes of the printer and take them out from the box. Now, remove the blue and red protective tapes carefully from the printer. Open all the parts. Place the ink cartridges in place by slight pushing in an upward direction. Make sure to settle the correct color for each cartridge. Now, place the input tray and output tray at their corresponding parts. Take the A4 size papers and put them in the input tray by sliding the slots outwards. After settling the papers, again arrange the slots to fit the paper size. Connect the Printer with the power source using the security cable to proceed with the Canon G2010 Setup. Switch the power ON, and wait for the Printer to respond till its LED light starts to glow. Related: Canon pixma g3411 wifi setupDownload and Install Drivers for Canon G2010 Wireless Printer
In the second step, you have to download and install the software and drivers for your Printer. Arrange a high-speed internet connection following up with the driver downloading and installation process. Also, make sure that you place the router close to your device to avoid any fluctuation in the network. Remove all the electronic and metal items between the devices to get better connectivity. Here is the step-by-step process to install the driver accurately:-
- Turn your Computer ON.
-
- Now, connect it with an active internet connection.
-
- Connect your Printer to the Computer successfully.
-
- Visit the online Canon’s official website and search for the driver.
-
- Enter the model as ‘Canon G2010’. The screen will display the driver that suits your printer for the Canon G2010 wifi setup.
-
- Click on the download button corresponding to it.
-
- Now, wait for the download process to finish.
-
- Hit the downloaded link to install the drivers on your computer.
-
- Go with the flow of instructions, and click the check box corresponding to ‘Terms and Conditions.
-
- Finally, click on the Finish button to end up the installation process.
-
- You can also download the software and Drivers for Canon G2010 Setup directly from the CD that comes up with the printer.
Canon G2010 Connect to WiFi
Next is the connectivity process between the computer and the Printer. After the successful connection, you will be able to print directly using your computer even remotely. You can connect the printer to the network either using a wired connection or wirelessly. Arrange a high-speed network connection and place the router close to the device. Protect it with a secure password to maintain a secure and reliable network. Follow the steps below for Canon G2010 Setup.-
- Firstly, check that your Printer is ON.
-
- Move to the ‘Settings’ option using the control panel.
-
- Use the Arrow key and navigate to the Device Settings option.
-
- Click on the OK button.
-
- Again use the Arrow key to navigate to the ‘LAN’ option.
-
- Â Click on the OK button.
-
- Again use the Arrow key to navigate to the ‘Wireless LAN’ option.
-
- Click on the OK button.
-
- You can also use the ‘STOP’ button to stop the process if it takes much time for its processing, again make the settings.
-
- Use the ‘Standard Setup’ option to avoid any waiting processing time.
-
- Click on the OK button.
-
- Use the arrow keys to move to the ‘WiFi Network’ for Canon G2010 Setup.
-
- Click on the OK button
-
- Enter the name and password for your network. It then completes the Canon G2010 wifi setup process successfully.
-
- Click on the OK button.
-
- You can now start printing from your Printer successfully. If you face any issue then you can proceed with the troubleshooting steps to overcome the issue and resolve it.