Epson printer may occasionally show an error while you install the inappropriate ink cartridge. The user may face Epson Printer Error Code 00043. This error occurs when an inappropriate ink cartridge is installed, and it can put a dampener on your printing efforts. This can happen if you recently replaced the ink cartridges and did not correctly insert the new ones, or if you accidentally installed a different type of cartridge than what your printer uses. Here, we will take you through troubleshooting steps to help fix the issue and get your printer back up and running in no time.
Meaning of Epson Printer Error Code 00043
If you’re getting an Inappropriate Ink Cartridge with your Epson printer, it means that the ink cartridge installed is not compatible with your printer model. You’ll need to replace the ink cartridge with a compatible one before you can continue printing. In some cases, you may be able to use a different type of ink cartridge with your printer.
Error code 00043 is a warning about the type of ink cartridge being used in the printer. If the incorrect type is installed, the printer will not allow you to print until it’s replaced with a compatible one.
Related: Epson Printer Error Code 0x97
Root Causes For Epson Printer Error Code 00043
Various factors may cause the Error Code 00043 in your printer. To need to carefully examine the cause of the error and then take appropriate action accordingly. Here are the steps to follow
- Inappropriate Ink Cartridge
- Incompatible Printer Driver
- Print Head Cleaning Issues
- Firmware Update Issue
- Paper Jam Issues
Troubleshoot and Fix Epson Printer Error Code 00043
If your Epson printer is displaying the error code ‘Inappropriate Ink Cartridge Installed,’ there are a few things you can do to troubleshoot and fix the issue.
Reinstall Ink Cartridge
Here are the steps to follow for reinstalling the ink cartridges and resolving the error code
- Firstly, turn off your printer and open the scanner unit.
- Carefully remove the ink cartridges from their slots, then push them down to lock them securely into place.
- Now, clean the contacts of each cartridge with a lint-free cloth or cotton swab moistened with Isopropyl alcohol.
- Close the scanner unit and insert the cartridges back into their respective slots.
- Finally, turn on your printer and check if the Epson Printer Error Code 00043 has been resolved.
Clean the Printhead
Finally, if none of the above methods work, you may need to clean the printhead. To do this, please follow these steps
- Go to ‘Start’ and select ‘Control Panel’.
- In the Control Panel, go to ‘Devices and Printers’, right-click on your Epson printer icon, and select ‘Printer Properties’.
- Now click on the ‘Maintenance’ tab at the top of the window.
- Select the ‘Print Head Cleaning’ option under the Maintenance tab; this will trigger a cleaning cycle for your printhead.
- After that, try printing a test page; if it prints successfully without any errors, then you have successfully resolved Epson Printer Error Code 00043.
Fix Extended Ink Cartridge Issue
If the issue is due to extended ink cartridges, then you need to replace the ink cartridges with new ones. If the error code persists after replacing the cartridges, please get in touch with Epson support for further assistance.
Reset Printer Settings
To fix Epson Printer Error Code 00043, you may need to reset the settings of your Epson printer. Follow the steps below:
- Go to ‘Start’ and select ‘Control Panel’.
- In the Control Panel, go to ‘Devices and Printers’, right-click on your Epson printer icon, and select ‘Printer Properties’.
- Now click on the ‘Maintenance’ tab at the top of the window.
- Select the ‘Head Cleaning’ option under the Maintenance tab; this will trigger an automatic cleaning cycle for your inkjet cartridge heads.
- After that, try printing a test page; if it prints successfully without any errors, then you have successfully resolved your issue.
Power Cycle Epson Printer
If the above methods do not work to resolve Epson Printer Error Code 00043, then you may need to power cycle your printer. To do this, follow these steps
- First, turn off your printer and unplug its power cord from the wall outlet.
- Leave it unplugged for a few minutes and then plug it back in.
- Now turn on your printer and check if the error code has been resolved.
Related: Epson Printer Error 034004
FAQs
How do I get my Epson Printer Out of Error Mode?
Follow the steps given below to troubleshoot and fix the issue
- Check if you have installed the correct ink cartridge for your printer model. If not, then install the correct ink cartridge and restart your printer.
- If you have installed the correct ink cartridge but are still facing the same error, then try removing and reinstalling the ink cartridge. Make sure to clean the electrical contacts on both the ink cartridge and the printer before reinstalling it.
- If the issue persists, then reset your printer by unplugging it from the power outlet for 30 seconds and plugging it back in again. Once your printer is reset, try printing a test page to check if the issue has been resolved.
- If you are still facing the same error, then there might be an issue with your printer’s firmware. In this case, you will need to contact Epson customer support for further assistance
How do I Fix Error 00043 on my Epson Printer?
If you are receiving Epson Printer Error Code 00043 or ‘Inappropriate Ink Cartridge Installed’ on your Epson printer, there are a few things that you can do to troubleshoot and fix the issue. First, check to make sure that you have installed the correct ink cartridge for your printer model. If you have, then try removing and reinserting the ink cartridge. If the error persists, try cleaning the electrical contacts on the ink cartridge and printer. If you are still receiving the error after trying these troubleshooting steps, then it is likely that your ink cartridge is defective and will need to be replaced.
What is Error Code 00043?
Epson Printer Error Code 00043 typically means that the wrong ink cartridge is installed in the printer. To fix this error, remove all of the ink cartridges from the printer and then carefully re-install them, making sure to insert each one in the correct slot. If you are still getting error code 00043 after doing this, try resetting your printer by unplugging it from the power outlet for 30 seconds and then plugging it back in.
How do I get my Epson Printer out of Error Mode?
The first step is to check whether you are using the wrong ink cartridge for your printer. If yes, replace the cartridge with a compatible one.
- You may also be facing Epson Printer Error Code 00043 due to an incompatible printer driver. Uninstall and reinstall the latest version of the Epson driver to resolve this issue.
- The user may experience this error due to print head clogging or alignment issues. Perform a deep cleaning of your printer’s print head once in a while and make sure it is properly aligned as per manufacturer instructions.
- This error can also be caused by outdated firmware on your printer. Upgrade your printer’s firmware manually or via the Epson website to make sure it is up-to-date.
- Another common cause of Error Code 00043 is paper jams inside your printer. Clear away the jammed paper carefully and make sure there are no obstructions left inside the machine before proceeding further.
How do I Reboot my Epson Printer?
To reboot your Epson Printer, follow these steps
- Firstly, turn off the printer.
- Unplug the power cord from the back of the printer.
- Wait for 1 minute, then plug the power cord back into the printer.
- Turn on the printer and check to see if the Epson Printer Error Code 00043 is gone and if you can print successfully.
More Helpful Guides
