Troubleshoot and Fix Canon Printer Error Code 6000

Bookmark
Last Updated - March 7, 2023

Are you having trouble getting your Canon printer to work? If you’re getting Canon printer error code 6000, it typically means that the ink cartridge carriage is not moving properly. Here, we will discuss Canon Printer Error Code 6000, how to troubleshoot it, and how to get your Canon printer back up and running in no time. You need to first configure all the factors that are responsible to generate this error. After that, you can follow up with the below troubleshooting guide to fix the error quickly and easily.

What Causes Canon Printer Error Code 6000?

There can be several reasons for your Canon printer to display the error code 6000. Some of the most common causes are:

  1. The ink cartridge carriage is obstructed by something. This could be anything from a loose piece of paper to a dust bunny.
  2. The ink cartridge carriage is not seated correctly.
  3. There’s an issue with one of the ink cartridges. It can be faulty or incompatible.
  4. The printer is not properly connected to the computer.
  5. The printer’s drivers are outdated or corrupt.
  6. The printer’s firmware is outdated.

Related: Canon Printer Error B2oo

How to Troubleshoot and Fix Canon Printer Error Code 6000?

If you are receiving the Canon error code 6000, there are a few things that you can do to troubleshoot and fix the issue.

Check the Ink Cartridge Levels

If you see the error code on your Canon printer, it could be due to low ink levels in the cartridges. Follow these steps to check the ink levels and fix the issue:

  • Firstly, open the Canon printer console and locate the ink cartridge level display
  • If any of the cartridges are running low on ink, replace them with new ones
  • Once all the cartridges have been replaced, restart your printer and try printing again
  • Finally, if the error code persists, there may be a more serious issue with your printer that will require professional assistance.

Check the Printer Connection with the Computer

Another step to take when dealing with the Canon Printer Error Code 6000 is to check that your printer is properly connected to your computer. Make sure that both the printer and the computer are turned on and that they are both connected via USB or Wi-Fi. If you’re using a USB connection, make sure the cable is secure and not loose. If you’re using a wireless connection, restart both devices and try connecting them again.

Reset your Printer

Resetting the Printer can often clear up minor issues and get your printer back up and running. This helps to fix Canon Printer Error Code 6000.

  • To reset your Canon printer, follow these steps:
  • Turn off the printer and unplug it from the power outlet.
  • Wait for a minute, then plug the printer back in and turn it on.
  • Try printing again. If the error code persists, move on to the next step.

Update Your Printer’s Firmware

If you see the Canon Printer Error Code 6000, it may be due to outdated firmware. To update your printer’s firmware, follow these steps:

  • Firstly, check the Canon website to see if there is a newer firmware version for your printer model.
  • Download the firmware file and save it to your computer.
  • After that, connect your printer to your computer using a USB cable.
  • Open the firmware file and follow the instructions to update the firmware on your printer.

Clear Printer Cache

To fix the error code, you need to clear the cache by following the steps below:

  • Go to the Control Panel and select Devices and Printers.
  • Right-click on your printer and click Printer Properties.
  • On the General tab, click the Printing Preferences button.
  • In the Printing Preferences window, click on the Maintenance tab.
  • Click on the “Clear Cache” button.
  • Click OK to confirm.

Perform a Hard Reset on Your Printer

If you’ve tried all of the other troubleshooting steps and you’re still getting the Canon Printer Error Code 6000, then it’s time to perform a hard reset on your printer. This will clear all of the settings on your printer and restore it to its factory defaults. To perform a hard reset on your Canon printer:

  • Firstly, turn off the printer and unplug it from the power outlet.
  • Press and hold down the “Stop/Reset” button on the printer for about 10 seconds.
  • While still holding down the “Stop/Reset” button, plug in the power cord to the printer and turn it on.
  • Keep holding down the “Stop/Reset” button until you see the green power light turn on.
  • Once the green power light is on, release the “Stop/Reset” button and your printer should now be reset back to its factory defaults.

Related: Canon Printer Error 5200

FAQS

How do I fix Error Code 6000?

If you face Canon Printer Error Code 6000, there are a few things you can do to try and fix the problem. Firstly, check that the printer is properly connected to your computer or another device. If the connection is loose or damaged, try reconnecting it. If the error persists, try restarting both the printer and your computer.

How do I Clear the Error Code on my Canon Printer?

To clear the Error code on your Canon Printer, you need to follow up with these steps:

  • Turn off your Canon Printer and unplug its power cord from the wall outlet.
  • Press and hold down the “Stop/Reset” button on the printer for 5-10 seconds. Then, plug the power cord back into the wall outlet while still holding down the “Stop/Reset” button.
  • Release the “Stop/Reset” button when you see a blinking green light to indicate that it has been reset successfully.
  • Turn on your Canon Printer and try printing again to check if the Error code has been cleared or not.

How do I Remove a Printer Error?

If your Canon printer is displaying an error code, there are a few things you can do to try and fix the issue. First, check the printer’s manual for instructions on how to clear the error. If that doesn’t work, try power cycling the printer off and then back on. If the error persists, you may need to contact Canon customer service for further assistance.

How do I Hard Reset my Canon Printer and fix Common Errors?

To hard reset your Canon printer, follow these steps:

  • Turn off the printer and unplug it from power.
  • Wait at least 60 seconds.
  • Plug the printer back in and turn it on.
  • Once the printer has finished booting up, try printing again.

How do I Clean my Canon 6000 Printer?

To clean your Canon 6000 printer, you will need to power off the printer and unplug it from the power source. Next, you will need to remove all of the ink cartridges from the printer. Once the ink cartridges have been removed, take a lint-free cloth and dampen it with distilled water. Gently wipe down all of the exposed areas of the print head. Be sure to avoid getting any water on the electrical contacts. Once you have finished cleaning the print head, reinsert the ink cartridges and plug the printer back in. Power on the printer and run a test print job to ensure that everything is working properly.

How to Fix Error Code 6000 on my Canon Printer?

There are a few steps to try to fix Canon Printer Error Code 6000:

  • Paper Jams: If you’re getting paper jams frequently, check for obstructions in the paper path and make sure the rollers are clean. You may also need to adjust the paper feed settings in your printer driver software.
  • Print Quality Issues: If you’re seeing lines or smudges on your prints, clean the printhead and check for proper ink cartridge installation. You may also need to run a printhead alignment utility provided by Canon.
  • Communication Errors: If your computer can’t communicate with the printer, make sure the USB cable is securely connected and try restarting both the computer and printer. You may also need to update your printer driver software.

More Helpful Guides

Canon LBP6030 Installer
Cartridge Cannot Be Recognized Canon G2000
Canon Pixma TS3522 Wireless Setup

Paul Brown

Paul Brown

Hi, I am Paul, a blogger, and a huge printer enthusiast. I have 10+ years of experience in the printing industry. Prior to offering my expertise through the digital platform, I worked on resolving almost every printer issue one can imagine. In the past 5 years, I have written numerous guides on paper jams, connectivity issues, and more. I believe that everyone should be able to enjoy the benefits of a well-functioning printer, and I'm here to make that possible. When I not tinkering with printers, I spend my time doing digital art that I'll eventually take a printout of!
Services
Get In Touch
Call Now ButtonGet Human +1-833-273-2379