If you’re getting Canon error code E05, it means your printer is experiencing a hardware error. This can be caused by several things, but the most common culprit is a faulty print head. Error code E05 is one of the most common errors that users experience. Here, we will provide a step-by-step guide on how to troubleshoot and fix the Canon Printer Error Code E05. With the right knowledge and guidance, it is possible to get your Canon printer up and running in no time. So, below are complete guidelines for resolving the error and starting work with the printer without any issues.

What is Canon Printer Error Code E05?

If you’re getting Canon Error Code E05, it means there’s a problem with your printer’s ink cartridge or the hardware. The main indication of the error is that the orange light will blink five times. The error also occurs if the user has not installed the print head appropriately or the installation is incorrect. However, you can easily resolve the error by following a series of troubleshooting steps and working efficiently with your Canon Printer.

Related: Canon Printer Error Code 6000

What are the Main Causes of Canon Printer Error Code E05?

There are a few different things that can cause the Canon E05 error. These are as follows:

• Incorrect Installation of Ink Cartridge: The most common is a problem with the ink cartridges. If the ink cartridges are not properly installed, they can cause this error.
• Clogged Print Head: Another common cause is a clogged print head. This can be caused by dried ink or debris build-up on the print head. If you suspect your print head is clogged, you can try cleaning it with a cotton swab dipped in distilled water.
• Communication Issues: The error can also be caused by a communication problem between the printer and the computer.
• Corrupt or Outdated Drivers: This is usually caused by an outdated or corrupted driver. You can try updating your drivers to see if this fixes the problem.

Step-by-Step Guide to Fix Canon Printer Error Code E05

As we all know this error is usually caused by a problem with the ink cartridges or print head, so it can usually be fixed easily. Here are the series of steps to follow to resolve the error:

Restart the Printer

Here are the steps to restart the printer:

• Turn off the printer and unplug its power cord from the wall outlet.
• Wait for at least a minute before plugging it back in.
• Turn it back on and check if the Canon Printer Error Code E05 is still there.

Check or Replace the Ink Cartridges

If restarting your printer didn’t work, then you should check the ink cartridges. Here are the steps to follow:

• Open the cartridge access door of your printer and remove all of them one by one.
• Check them thoroughly for any dirt or debris that may be present on their contacts. If you find any, clean it with a soft cloth moistened with water.
• Reinsert them back into their respective slots and close the door of your printer.
• Turn it back on and check if it’s working properly now.
• This should resolve the Canon Printer Error Code E05 issue on your Canon Printer.

Reinstall Ink Cartridge

If the above steps don’t work, then you must reinstall the ink cartridge. Here are the steps to do that:

• Turn off your printer and remove all of its cartridges.
• Reinsert them back into their respective slots and make sure they are properly installed.
• Restart your printer and check if it’s working properly now.
• This should resolve the Canon Printer Error Code E05.

Reset Printer Settings

If even after reinstalling the ink cartridges, you’re still facing this error, then you should reset your printer settings. Here are the steps to do that:

• Go to the Control Panel of your computer and open the Devices & Printers section.
• Right-click on your Canon Printer’s icon and select “Printer Properties” from the list of options available.
• Go to the Maintenance tab and click on the “Reset Printer Settings” option available there.
• Click on the “Yes” button when prompted for confirmation and wait for a few moments until it gets completed successfully.
• Turn off your printer once done with the resetting process and turn it back on after a minute.
• This should resolve the Canon Printer Error Code E05 issue on your printer.

Factory Reset of Printer

Lastly, you should perform a factory reset of your printer. Here are the steps to do that:

• Turn off your printer and unplug its power cord from the wall outlet.
• Wait for at least a minute before plugging it back in and turning it back on.
• Press and hold the “Resume/Cancel” button for a few moments until you see an orange light flashing on your printer.
• Release the button and wait for a few moments until it gets completed successfully.
• Turn off your printer once done with the resetting process and turn it back on after a minute.
• This should resolve the Canon Printer Error Code E05 issue on your printer.

Related: Canon Printer Error Code 5100

FAQs

How do I Fix the E05 Error on the Canon Printer?

To fix Canon Printer Error Code E05 and prevent it from occurring again, follow these steps:

1. Make sure that the ink cartridge is properly seated in the carriage. The ink cartridge must be locked into place for the printer to work correctly.
2. Clean the electrical contacts on the ink cartridge and carriage with a lint-free cloth. Be sure to remove any dirt or debris that might be causing a connection issue.
3. Re-install the ink cartridge and close the printer’s cover. Make sure that the cover is closed securely so that no air can enter and dry out the ink.
4. Turn on the printer and print a test page to make sure that the error has been fixed.

Why is my Canon Printer Flashing E05?

There can be several reasons for Canon Printer Error Code E05. Here are some of the most common causes:

1. The ink cartridges are not properly seated in the carriage.
2. The ink cartridges are empty or nearly empty.
3. There is air in the ink supply line.
4. The printhead is damaged or defective.
5. The printer’s firmware needs to be updated.

How do I Clear the Error Code on my Canon Printer?

If your Canon printer is displaying the error code E05, there are a few things you can do to try and clear the error.

1. First, check to make sure that all of the cables are properly connected and that there is no paper jam.
2. If the error persists, you can try resetting the printer by unplugging it from the power source for 30 seconds. Once the printer is plugged back in, try printing again.
3. If the error still occurs, you may need to contact Canon support for further assistance.

What is Error E05 in G3010?

The Canon Printer Error Code E05 indicates that the ink cartridge is not installed properly. There are several ways to fix this error, including checking the ink cartridge for damage and making sure it is properly seated in the printer. You can also try cleaning the contacts on the ink cartridge and printer. If these steps do not work, you may need to replace the ink cartridge.

What is Error Code E05 Canon MG2120?

Error code E05 is a Canon printer error that indicates a problem with the ink cartridge. The most likely cause of this error is a clogged ink cartridge, but it can also be caused by a faulty or incorrect ink cartridge. It can also be due to the problem with your printer itself.

How do I Reset my Canon Printer?

If your printer is displaying ‘Canon Printer Error Code E05’, then you can reset the printer to fix it. Here are the steps to reset the Canon Printer:

1. Press and hold down the power button for 10 seconds.
2. You can also try unplugging the printer from the power outlet and then plugging it back in.
3. If neither of these methods works, you will need to access the service mode on your printer.
4. For some Canon printers, you can do this by pressing and holding down the Resume/Cancel button for 10 seconds while the printer is turned off.
5. Once you are in service mode, use the arrow keys to navigate to “Factory Reset” and press “OK”.

More Helpful Guides

Fix Canon Printer Error B200
Canon Support
What to Do When Canon Printer Orange Light is Flashing