Fix HP Printer Error Code 3F0 – Boot Device Not Found

Last Updated - December 21, 2023

Fix HP Printer Error Code 3F0 – Boot Device Not Found

HP Printer 3F0 Error can be one of the most annoying and frustrating errors to deal with for any HP printer user. Here, we will explore the causes and troubleshooting steps to fix HP Printer Error Code 3F0. We will go through why this error occurs, how you can fix it, and what you can do to prevent it from happening in the future. If you’re getting Error Code 3F0, it means there’s a problem with your boot device. This can be caused by a variety of things, but most commonly it’s either a problem with your BIOS settings or a corrupted hard drive.

Table of Contents

What are the Causes of HP Printer Error Code 3F0?

One of the most common causes of the HP Printer 3F0 Error is a boot device not found error. This can occur if the printer is not properly connected to the computer or if the printer’s drivers are outdated. Other possible causes are

Boot Device not Found
Hard Driver not Plugged Properly
Corrupt Hard Disk partition
Incorrect Boot Service Sequence
Corrupt Bootable disk
Damaged system files
The incorrect Boot order in BIOS

Related: HP Deskjet 2331 Setup

Troubleshoot and Fix HP Printer Error Code 3F0

There are various steps that you can perform to fix the 3FO Error code on your HP Printer. Follow these steps and check for the solution before succeeding to the next step.

Change the Boot Order

Here are the steps that you need to follow for changing the boot order.

Power on your HP Printer and press the F10 key.
Choose the System Configuration option from the given list of options.
Now, choose the Hard Disk Boot Priority Option from the list of available options.
Set the boot order to “CDDVD or USB Device” as a priority, followed by the Hard Drive.
Save all changes and restart your printer to check if it resolves the issue or not.

Update BIOS

If changing the boot order didn’t work then you need to update your printer’s BIOS version to its latest version released by the HP Printer manufacturer. You can download and install this latest version using a USB drive from HP’s official website and then check for the solution of HP Printer Error Code 3F0.

Reset Printer

If none of these worked for you then you can try resetting your HP Printer by following these steps

Power off your printer and disconnect all connected cables including the power cord, USB cable, Ethernet cable, etc.
Press & hold the power button for 15 seconds to reset your HP Printer completely and then release it once done.
Now, wait for 5 minutes so that the printer can reset itself completely, and then connect back all cables to your HP Printer as before.
Power on your printer and check if the issue is fixed or not.

Restore BIOS to Default Settings

You can try restoring your printer’s BIOS settings to its default version. Here are the steps that you need to follow to resolve HP Printer Error Code 3F0.

Power on your HP Printer and press the F10 key to open the System Configuration menu.
Select the Restore Defaults option from the list of available options.
Save all changes and restart your printer to check if it resolves the issue or not.

Fix and Rebuild Damaged MBR

You can try fixing and rebuilding the Master Boot Record (MBR) of your HP Printer by following these steps

Download and install a reliable Partition Repair utility on your computer.
Now, launch the Partition Repair utility and select the hard drive partition containing your HP Printer’s BIOS.
Click on the Fix MBR option to repair the damaged MBR and then click on the Rebuild MBR option to rebuild it completely.
Finally, save all changes and restart your printer to check if HP Printer Error Code 3F0 resolves or not.

Reconnect Hard Drive

If all the above steps failed then there is a chance that your printer’s hard drive might have become disconnected from its main board. In this case, you need to open the back panel of your HP Printer and check if the hard drive has been connected back properly or not. If not, then reconnect it correctly and then reboot your printer to check if it resolves the issue or not.

FAQs

How do I fix HP error 3F0?

Follow the steps below to fix HP Printer Error Code 3F0:

Restart your computer and turn off the printer.
Unplug the printer’s USB cable from the computer.
Turn on the printer and wait for it to complete its startup sequence.
Plug the printer’s USB cable back into the computer.
Download and install any available updates for your printer from HP’s website.
If you’re still getting the error, try resetting your printer by turning it off, unplugging it from the power outlet, and then plugging it back in after 30 seconds.

How do I Enable a bootable Device?

In the case of HP Printer Error Code 3F0, it means that the device is not able to boot up. There are a few things you can try to fix this problem

Check that the power cord is plugged in securely and that the outlet is working.
Try resetting the printer by turning it off and then on again.
If the printer is still not booting up, try clearing any pending print jobs by canceling them from the print queue.
If none of these solutions work, you may need to replace the firmware on your HP printer.

What is a 3F0 Error?

The HP Printer Error Code 3F0 is a very common error for HP printers. This error code indicates that the printer cannot find the boot device. This can be caused by a variety of things, but the most common cause is a loose or damaged cable. If you see this error code, it is important to check all of the cables connected to your printer to make sure they are secure and not damaged.

How do I Force HP BIOS Update?

If you decide to use the HP bios update utility, then you should follow these steps

Firstly, download the utility from the HP website.
Double-click on the downloaded file to launch it.
Click on Update BIOS.
Follow the instructions on the screen to complete the process.

How do I fix my 3F0 Hard Drive?

HP Printer Error Code 3F0 can be caused by several things, but the most common is a faulty or disconnected hard drive. To fix this problem, you’ll need to reconnect your hard drive and make sure that it’s properly configured in the BIOS. If you’re not sure how to do this, please consult your computer’s documentation or contact its manufacturer for assistance.

More Helpful Guides

Hp Support
How to Fix Missing Lines When While Printing From HP Printer
Connect HP Deskjet GT5821 to WiFi

Troy Parkinson

Greetings, I am Martin! I am a Tech Specialist and a Blogger. As a technology fanatic, I am enthusiastic about all things related to internet devices and how they are transforming our lives. My years working in the tech industry have helped me gain extensive knowledge of the latest internet devices. I am here to provide my readers with informative and engaging articles on the latest updates, innovations, and trends in the world of internet devices. When I'm not trying out the latest tech products, you'll often find me on a hiking trail, enjoying the breathtaking outdoors.