Rollo is a high standardized printer that helps the users to follow up with the printing tasks along with creating barcodes, labels, name badges and others for different sizes. You need to install the drivers according to the system or operating system you are using. Rollo Printer Setup is a quick and easy process of installing the drivers and then connecting the devices wirelessly over a network. The Printer does not operate using any ink toner or cartridge. So, there is no headache to purchase and assemble the ink cartridges every time. It can print over 500,00 shipping labels. Here we will be discussing about the complete setup guidelines for the Rollo Printer wirelessly over a network.

Rollo Printer Setup Using a Wi-Fi LED Button – Connect to Computer

To connect the Rollo Printer to your computer, you can perform a wireless setup for it. To proceed with the setup process, arrange a high speed internet connection and connect both the devices to the same network. Make sure to place the router close to the device for the best speed without any disturbances. Follow the steps below for setup process:

1. Go to the Rollo Printer and check its panel.
2. Press the Wi-Fi LED button and hold it for few seconds, normally up to 15 seconds.
3. When the printer’s yellow light will start flashing, then release the button.
4. The Printer will enter in the AP mode.
5. Go to your Computer, and check the Wi-Fi network list.
6. Locate the name of the Rollo Printer, and hit the ‘Connect’ button.
7. The screen will display a prompt.
8. Click on the option ‘Connect using a security key instead’.
9. Enter the password as ‘rolloprinter’.
10. The screen will now show a pop up window for ‘Rollo Printer Portal Page’.
11. Click on the name corresponding to your internet network and enter the password for it. Make sure to use the same network to which you connect the Printer.
12. Check the Wi-Fi LED light of the Rollo Printer.
13. It must be solid blue in color. It shows a secure and successful connection.
14. Print the test label to confirm the secure connection.

Make sure to have an active internet connection throughout the process for successful results.

Also check: Dell printer setup

Rollo Printer Setup for Windows – How To Setup Rollo Printer on Windows?

Rollo Printer is compatible to Windows as well as Mac. You can connect the device to both the systems and use it for printing labels, cards, and much more. The model of your printer will decide whether you can follow the wired connection for the setup process or the wireless setup. Follow the steps below for Rollo Printer Setup wirelessly for the Windows operating system.

1. Go online on the official Rollo website.
2. Check for the Rollo Drivers.
3. You can visit the direct link for the driver download at https://www.rollo.com/driver/
4. Click on the ‘Download Windows Driver’ option on this page.
5. Wait for the download to complete.
6. Rollo is compatible with the Windows XP, Windows 7, Windows 8 and Windows 10. If your system does not operate on these OS, then you need to change the system or the OS.
7. Now click on the downloaded file to begin the installation process for Rollo Printer Setup.
8. Go with the flow of the installer.
9. Click on the Finish button at last.
10. Now, open the control panel of the computer.
11. Click on ‘Devices and Printer’ option.
12. Click on ‘Add a Printer or Scanner’
13. Select the name of your Printer.
14. Right-click on the Printer name on the screen, and click on Printing Preferences.
15. Click on the ‘Advanced’ button at the bottom of the pop up window.
16. Click on Paper size and select the size according to your requirements.
17. Click the OK button at last.

It completes the Rollo Printer Setup for your Windows. You can now start your printing task wirelessly over a network.

Rollo Printer Setup for Mac – How To Setup Rollo Printer on Mac?

Rollo works well with the Mac operating system also. You can perform a wireless setup using an active network connection. Follow the steps below:

1. Visit the official Rollo website at https://www.rollo.com/driver/
2. Check for the Rollo Drivers.
3. Click on the ‘Download Mac Driver’ option on this page.
4. Wait for the download to complete.
5. Now, open the downloaded DMG file to install the drivers on your Mac system.
6. Go with the flow of instructions to complete the installation process.
7. Now, go to system preferences in your computer.
8. Click on option ‘Printers and Scanners.
9. Click on the ‘+’ button at the bottom-left side of the pop up window.
10. Click on ‘Printer ThermalPrinter’ from the list.
11. The drop down menu will appear. Click on the ‘Select Software’ option.
12. Click on ‘Rollo Printer’.
13. Hit the OK button.

It now completes the Rollo Printer Setup on your Mac system. You can now print the files successfully.

Also check: Brother printer wifi setup

Setup Rolo Printer Using the IL Print

For Rollo Printer Setup with the IL Prints, first of all download the drivers for your system. You can visit the online official website to download the driver successfully. Make sure to download the driver that matches the operating system of your computer.

1. Click on your name first on the screen.
2. Go to Settings option.
3. Navigate to the left menu, and click on the ‘Printing’ option.
4. Click on the button ‘Setup Your Printer’.
5. The screen will show the Standard Print Method, click on the IL print method.
6. Click on Try IL Print.
7. The screen will direct you to the IL Print where you can install it successfully.
8. Click on the ‘Download IL Print’ button to proceed.
9. The system will now download the IL Print.
10. You can check the executable file in the lower bottom of the browser.
11. Click on the file to open it.
12. Now, go with the instruction flow to begin the installation process.
13. Click on ‘next’ button, and then click on the ‘yes’ button.
14. Check the system tray of the window after finishing the installation process.
15. Check for the IL Print icon on the tray.
16. If the IL Print is running, then you have to visit the Stratify option to finish up the running process. Click on the next and finish button to end the process.
17. Now, click on the name of your Printer’s model number, label, size and orientation to proceed.
18. Click on the ‘Complete Setup’ button.

It now completes the Rollo Printer Setup process using the IL Print method. You can now test the connection by printing the test label.  

Rollo Printer Setup

Rollo Printer Setup

Rollo is a high standardized printer that helps the users to follow up with the printing tasks along with creating barcodes, labels, name badges and others for different sizes. You need to install the drivers according to the system or operating system you are using. Rollo Printer Setup is a quick and easy process of installing the drivers and then connecting the devices wirelessly over a network. The Printer does not operate using any ink toner or cartridge. So, there is no headache to purchase and assemble the ink cartridges every time. It can print over 500,00 shipping labels. Here we will be discussing about the complete setup guidelines for the Rollo Printer wirelessly over a network.

Rollo Printer Setup Using a Wi-Fi LED Button – Connect to Computer

To connect the Rollo Printer to your computer, you can perform a wireless setup for it. To proceed with the setup process, arrange a high speed internet connection and connect both the devices to the same network. Make sure to place the router close to the device for the best speed without any disturbances. Follow the steps below for setup process:

1. Go to the Rollo Printer and check its panel.
2. Press the Wi-Fi LED button and hold it for few seconds, normally up to 15 seconds.
3. When the printer’s yellow light will start flashing, then release the button.
4. The Printer will enter in the AP mode.
5. Go to your Computer, and check the Wi-Fi network list.
6. Locate the name of the Rollo Printer, and hit the ‘Connect’ button.
7. The screen will display a prompt.
8. Click on the option ‘Connect using a security key instead’.
9. Enter the password as ‘rolloprinter’.
10. The screen will now show a pop up window for ‘Rollo Printer Portal Page’.
11. Click on the name corresponding to your internet network and enter the password for it. Make sure to use the same network to which you connect the Printer.
12. Check the Wi-Fi LED light of the Rollo Printer.
13. It must be solid blue in color. It shows a secure and successful connection.
14. Print the test label to confirm the secure connection.

Make sure to have an active internet connection throughout the process for successful results.

Also check: Dell printer setup

Rollo Printer Setup for Windows – How To Setup Rollo Printer on Windows?

Rollo Printer is compatible to Windows as well as Mac. You can connect the device to both the systems and use it for printing labels, cards, and much more. The model of your printer will decide whether you can follow the wired connection for the setup process or the wireless setup. Follow the steps below for Rollo Printer Setup wirelessly for the Windows operating system.

1. Go online on the official Rollo website.
2. Check for the Rollo Drivers.
3. You can visit the direct link for the driver download at https://www.rollo.com/driver/
4. Click on the ‘Download Windows Driver’ option on this page.
5. Wait for the download to complete.
6. Rollo is compatible with the Windows XP, Windows 7, Windows 8 and Windows 10. If your system does not operate on these OS, then you need to change the system or the OS.
7. Now click on the downloaded file to begin the installation process for Rollo Printer Setup.
8. Go with the flow of the installer.
9. Click on the Finish button at last.
10. Now, open the control panel of the computer.
11. Click on ‘Devices and Printer’ option.
12. Click on ‘Add a Printer or Scanner’
13. Select the name of your Printer.
14. Right-click on the Printer name on the screen, and click on Printing Preferences.
15. Click on the ‘Advanced’ button at the bottom of the pop up window.
16. Click on Paper size and select the size according to your requirements.
17. Click the OK button at last.

It completes the Rollo Printer Setup for your Windows. You can now start your printing task wirelessly over a network.

Rollo Printer Setup for Mac – How To Setup Rollo Printer on Mac?

Rollo works well with the Mac operating system also. You can perform a wireless setup using an active network connection. Follow the steps below:

1. Visit the official Rollo website at https://www.rollo.com/driver/
2. Check for the Rollo Drivers.
3. Click on the ‘Download Mac Driver’ option on this page.
4. Wait for the download to complete.
5. Now, open the downloaded DMG file to install the drivers on your Mac system.
6. Go with the flow of instructions to complete the installation process.
7. Now, go to system preferences in your computer.
8. Click on option ‘Printers and Scanners.
9. Click on the ‘+’ button at the bottom-left side of the pop up window.
10. Click on ‘Printer ThermalPrinter’ from the list.
11. The drop down menu will appear. Click on the ‘Select Software’ option.
12. Click on ‘Rollo Printer’.
13. Hit the OK button.

It now completes the Rollo Printer Setup on your Mac system. You can now print the files successfully.

Also check: Brother printer wifi setup

Setup Rolo Printer Using the IL Print

For Rollo Printer Setup with the IL Prints, first of all download the drivers for your system. You can visit the online official website to download the driver successfully. Make sure to download the driver that matches the operating system of your computer.

1. Click on your name first on the screen.
2. Go to Settings option.
3. Navigate to the left menu, and click on the ‘Printing’ option.
4. Click on the button ‘Setup Your Printer’.
5. The screen will show the Standard Print Method, click on the IL print method.
6. Click on Try IL Print.
7. The screen will direct you to the IL Print where you can install it successfully.
8. Click on the ‘Download IL Print’ button to proceed.
9. The system will now download the IL Print.
10. You can check the executable file in the lower bottom of the browser.
11. Click on the file to open it.
12. Now, go with the instruction flow to begin the installation process.
13. Click on ‘next’ button, and then click on the ‘yes’ button.
14. Check the system tray of the window after finishing the installation process.
15. Check for the IL Print icon on the tray.
16. If the IL Print is running, then you have to visit the Stratify option to finish up the running process. Click on the next and finish button to end the process.
17. Now, click on the name of your Printer’s model number, label, size and orientation to proceed.
18. Click on the ‘Complete Setup’ button.

It now completes the Rollo Printer Setup process using the IL Print method. You can now test the connection by printing the test label.