If you’re a Samsung printer user, chances are you’ve encountered an error code or two during your printing journey. One of the most common errors is A1-4112, which indicates actuator motor failure. This error can be frustrating and confusing for users who may not be able to print the documents. Here, we will discuss the Samsung Printer Error Code A1-4112 – Actuator Motor Failure and how to fix it quickly and easily. This error can occur for a variety of reasons, but most often, it’s caused by a problem with the printer’s fuser assembly or power supply.
Main Causes of Samsung Printer Error Code A1-4112
Error Code A1-4112 means that there is a problem with the actuator motor. An actuator motor is a small, electrically powered motor that drives the actuator arm in a CD or DVD drive. This can be caused by several things, including:
- A loose or damaged connector
- Defective motor
- Problem with the driver’s firmware
- Damage to the motor’s control board
- Dirty or damaged Drive Head
How to Troubleshoot and Fix Samsung Printer Error Code A1-4112
To fix the Samsung Error 4112 on your printer, you need to follow up with the troubleshooting steps below:
Check the Connections
If your Samsung printer is displaying the error code A- – Actuator Motor Failure, the first thing you should do is check the connections. Make sure that all of the cables are securely connected and that there are no loose or damaged wires. If everything looks good, try resetting the printer by unplugging it from the power outlet for 30 seconds and then plugging it back in.
Clear the Print Job Queue
To clear the print job queue, follow the steps below:
- Firstly, press the Stop/Clear button on your printer.
- Press and hold the Power button for about 10 seconds to turn off your printer.
- After that, unplug the power cord from the outlet and wait for 30 seconds before plugging it back in.
- Press the Power button to turn on your printer. Check for the solution of Samsung Printer Error Code A1-4112.
Replace the Actuator Motor
Replacing the actuator motor is a relatively simple task that can be completed in just a few minutes. To replace the actuator motor, follow the steps below:
- Firstly, please turn off your Samsung printer and unplug it from the power outlet.
- Remove the top cover of the printer by loosening the two screws located at the back.
- After that, locate the actuator motor near the front of the printer and disconnect the two wires connected to it.
- Remove the old actuator motor by unscrewing its mounting bracket from the side of the printer.
- Install the new actuator motor in its place and screw on its mounting bracket securely.
- Finally, reconnect the two wires to their respective terminals on the new actuator motor.
Update Driver Firmware
If the problem persists even after replacing the actuator motor, you should try updating the driver firmware to fix Samsung Printer Error Code A1-4112.
- Visit the Samsung official website.
- Download the latest compatible driver for your printer.
- Install it on your computer and run it to update the printer’s firmware.
- Lastly, restart your printer and check if it works.
Replace the Motor Control Board
If updating the printer’s driver firmware doesn’t help, you should try replacing the motor control board. To replace the motor control board, follow the steps below:
- Firstly, please turn off your printer and unplug it from the power outlet.
- Remove the top cover of the printer by loosening the two screws located at the back.
- After that, find and disconnect all wires connected to the motor control board.
- Remove the old motor control board by unscrewing its mounting bracket from the inside of your printer.
- Install a new motor control board in its place and secure it with its mounting bracket.
- Finally, reconnect all wires to their respective terminals on the new motor control board.
- Once done, restart your printer and check if the Samsung Printer Error Code A1-4112 is fixed or not.
Reset the Printer
To reset the printer, follow these steps:
- Firstly, please turn off the printer and unplug it from the power outlet.
- Please wait at least 60 seconds, then plug the printer back in and turn it on.
- After that, if the error code persists, open the printer’s cover and check for any obstructions around the actuator motor.
- Finally, remove any foreign objects and close the cover.
FAQS
How to Replacing the Actuator Motor?
If you face Samsung Printer Error Code A1-4112, it depicts the actuator motor failure. This means that the actuator motor that moves the print head carriage has failed and needs to be replaced. Follow the steps below to replace the actuator motor:
- Firstly, unplug the printer from its power source and remove any paper from the paper tray.
- Next, locate the actuator motor on the back of the printer.
- After that, disconnect the wires from the actuator motor.
- Then, use a screwdriver to remove the two screws that hold the actuator motor in place.
- Lift out the old actuator motor and insert the new one.
- Secure it with the screws removed earlier.
- Finally, reconnect all wires to their proper places on the new actuator motor.
What is Error A1 411 on Samsung Printer?
If your printer displays Samsung Printer Error Code A1-4112, it means there is a problem with the actuator motor. This component is responsible for moving the print head back and forth, so if it’s not working properly, it can prevent your printer from functioning correctly. Make sure that the actuator motor is properly connected to the main board. If it’s loose, it could be causing the error.
How do I Clear the Error Code on my Printer?
To clear the error code A1-4112 on the Samsung Printer, follow the steps below:
- Firstly, ensure the printer is turned off and unplugged from the power outlet.
- Next, open up the printer and locate the actuator motor.
- After that, disconnect it from the power supply and clean any debris or dust on it.
- Finally, reconnect the actuator motor to the power supply and turn on the printer.
How do I Reset my Samsung Printer?
To fix Samsung Printer Error Code A1-4112, you need to reset the printer as follows.
- Firstly, power it off and unplug it from the power source.
- Then, open up the top cover and remove any jammed paper inside.
- Next, locate the control panel board and find the “Reset” button. Press and hold this button for about 10 seconds to reset the printer.
- Lastly, plug the printer back in and turn it on.
How do I Open Samsung Printer Diagnostics?
Follow these steps to open the printer diagnostic center and fix Samsung Printer Error Code A1-4112.
- Firstly, open up Samsung Printer Diagnostics by going to Start > All Programs > Samsung > Samsung Printers > Samsung Printer Diagnostics.
- Once the program is open, click on the Maintenance tab and then select the ‘Ink System Reset’ option.
- This will reset the ink system and hopefully clear up the error code.
- If this doesn’t work, you may need to replace the actuator motor – which can be done by taking out the old one and inserting a new one in its place.
More helpful posts:
