Troubleshoot and Fix Dell Printer Error Code 006-370

Last Updated - January 11, 2024

Troubleshoot and Fix Dell Printer Error Code 006-370

Dell is a world-renowned manufacturer of printers, and their printers are known for their quality and reliability. However, like any other piece of technology, Dell printers can sometimes experience errors. One such error is the Dell Printer Error Code 006-370. This error can occur for a variety of reasons. This often happens when your printer is not properly set up or if there are any problems with its software. Here, we will discuss the steps needed to troubleshoot and fix this error code quickly and easily for the appropriate functioning of the printer.

Table of Contents

Causes of Dell Printer Error Code 006-370

Dell printer error code is most often caused by one of the following:

The printer is not properly connected to the computer. Check all cables and connections to make sure they are secure.
There is a problem with the printer driver. Try updating the driver or reinstalling it.
The printer is not compatible with the operating system on your computer. Check Dell’s website to see if there are any updated drivers or compatibility issues.
There is a problem with the settings on the printer. Try resetting the printer to its default settings.

Related: Dell Printer Support

Troubleshooting Steps for Fixing Dell Printer Error Code 006-370

If you are facing Dell printer error code 006-370, then follow the below troubleshooting steps to fix the issue:

Restart your Dell printer and computer

The first step is to restart your Dell printer as well as your computer. This will help to resolve any temporary issues that might be causing the error code 006-370.

Check if the printer is properly connected

Sometimes, the error code 006-370 can occur if the printer is not properly connected to the computer. So, check all the connections and make sure that they are tight and secure.

Check Printer Settings

The most common cause of this error is incorrect printer settings. To check your printer settings, follow the steps below:

Firstly, open the control panel and click on “Printers”.
Right-click on your Dell printer and select “Properties”.
After that, click on the “Advanced” tab and make sure that the correct printer driver is selected.
If you are not sure which driver to select, you can check the list of supported drivers on Dell’s website.
Lastly, try printing a test page to check for success.

Check the Wireless Connection or USB Cable

If you are receiving the Dell Printer Error Code 006-370, there is likely an issue with your printer’s wireless connection or USB cable. To resolve this issue, follow the steps below:

Check that your printer is turned on and connected to your computer via a USB cable.
If your printer is not turned on, turn it on and wait for it to connect to your computer.
After that check that the wireless connection is strong and there are no interruptions in the signal.
If you are using a USB cable, check that the cable is firmly connected to both your printer and computer.
Lastly, print a test page to see if the error code has been resolved.

Update the Printer Driver

To update your printer driver manually, you need to go to the website of your printer manufacturer and download the latest driver for your model printer. Once you have downloaded the driver, install it on your computer and follow the instructions provided.

Reinstall the Printer Software

If you are facing Dell Printer Error Code 006-370, then follow these steps to reinstall the printer software:

Unplug the USB cable from the printer and computer.
Download the latest Dell printer software from the Dell website.
After that, install the software on your computer.
Connect the USB cable to the printer and computer.
Finally, turn on the printer and try printing again.

Clear Print Spooler Queue

To clear the print spooler queue, follow these steps:

Press the Windows key + R to open the Run box.
Type services. msc and press Enter.
After that, find the Print Spooler service and double-click on it to open its Properties window.
In the General tab, click on Stop. Once the service has been stopped, click on Start to restart it.
Click on OK to close the Properties window.

Reset the Printer Settings

To do this, open the control panel on your printer and navigate to the “Reset” menu. From here, you can follow the prompts to reset your printer to its factory settings. Once that’s done, try printing again and see if the error code has cleared up.

FAQS

What is Dell Printer Error Code 006-370?

Dell printer error code 006-370 means that the printer is not properly connected to the computer. Also, it can occur if the printer drivers are not installed correctly. If you are receiving this error code, we recommend following the troubleshooting steps below.

Check that the printer is properly connected to the computer.
Make sure all cables are securely connected and that the printer is turned on.
Try unplugging it and plugging it back in.
Next, check that the printer drivers are installed correctly.
If nothing works, perform a factory reset of the printer.

How do I Fix a Dell Printer Error?

Here are some tips on how to troubleshoot and fix common Dell Printer Error Code 006-370:

Check the printer’s overall connectivity. Make sure all the cables are securely connected and that there is no blockage preventing proper communications between the printer and computer.
Ensure that your drivers are up to date. Visit Dell’s website and download the latest drivers for your specific printer model, if necessary.
Clear any jobs that may be stuck in the print queue by going into devices and printers on your computer, right click on the printer icon and selecting “See What’s Printing” from the menu, then click “Printer” at the top of this window and select “Cancel All Documents”.
Uninstall any software related to your Dell Printer, such as a Print Spooler or Driver Software, then reinstall it using Dell’s instructions or with an installation CD if you have one available.

How do I Reset my Dell Printer?

If you are receiving a Dell printer Error Code 006-370, one of the first things you can do is reset your Dell printer. To do this, follow the steps below:

Power off your Dell printer and unplug it from the power outlet.
Wait for 60 seconds before plugging the printer back in and powering it on.
Try printing again and see if the error code has been resolved.

More Helpful Guides

Dell Support
How to Reset Dell Printer
Dell Printer Keeps Going Offline Fix
Dell v305w Wifi Setup

Paul Brown

Hi, I am Paul, a blogger, and a huge printer enthusiast. I have 10+ years of experience in the printing industry. Prior to offering my expertise through the digital platform, I worked on resolving almost every printer issue one can imagine. In the past 5 years, I have written numerous guides on paper jams, connectivity issues, and more. I believe that everyone should be able to enjoy the benefits of a well-functioning printer, and I'm here to make that possible. When I not tinkering with printers, I spend my time doing digital art that I'll eventually take a printout of!