Step-by-Step Guide Beginners – How to Setting Up Canon G2010

ClosePlease login
Last Updated - December 11, 2023

Step-by-Step Guide Beginners – How to Setting Up Canon G2010

Canon G2010 is an inkjet Printer that provides multiple functionalities for printing, scanning, and copying. It offers low-cost printing using its ink tank technology. The prints are of high quality and you can get a resolution of 4800X1200 dpi. You can follow up with the Canon G2010 Setup to connect the printer to the computer or any other device and use it for printing the files. Before following up with the setup process, kindly make sure to arrange and connect the device that is compatible with it for successful results. Also, remember to download and install the drivers and software for the printer to avoid any printing errors. Here we will discuss the complete Canon G2010 wifi setup process including assembling the printer, connectivity, and driver installation.

System Requirements For Canon G2010 Setup

You have to first check the compatibility of the device with the printer to connect it and give printing commands directly. Canon G2010 is compatible with various devices and OS as explained below:
      • Operating System: Windows 7, Windows 7 (64 Bits), Windows 8.1, Windows 8.1 (64 Bits), Windows 10, Windows 10 (64 Bits), Windows 11.
      • System Requirements: Windows 7 SP or later, Windows 8.1 (32 bits and 64 bits), Windows 10 (32 bits and 64 bits)
      • Operating Environment: Temperature (41 °F to 95 °F), Humidity (10 to 90 % RH)
    After checking the system requirements, you are now ready to perform the setup for your printer. Make sure to have an active internet connection while performing the setup process. Also, check all the wires and cables before proceeding with the connections to avoid any failures in the future.

    How to Setup Canon g2010 Wireless Printer

    Start the PrinterThe very first step is to assemble all the parts of the printer in place. Peel off all the protective tapes of the printer and take them out from the box. Now, remove the blue and red protective tapes carefully from the printer. Open all the parts. Place the ink cartridges in place by slight pushing in an upward direction. Make sure to settle the correct color for each cartridge. Now, place the input tray and output tray at their corresponding parts. Take the A4 size papers and put them in the input tray by sliding the slots outwards. After settling the papers, again arrange the slots to fit the paper size. Connect the Printer with the power source using the security cable to proceed with the Canon G2010 Setup. Switch the power ON, and wait for the Printer to respond till its LED light starts to glow.Related: Canon pixma g3411 wifi setup

    Download and Install Drivers for Canon G2010 Wireless Printer

    In the second step, you have to download and install the software and drivers for your Printer. Arrange a high-speed internet connection following up with the driver downloading and installation process. Also, make sure that you place the router close to your device to avoid any fluctuation in the network. Remove all the electronic and metal items between the devices to get better connectivity. Here is the step-by-step process to install the driver accurately:
        1. Turn your Computer ON.
        1. Now, connect it with an active internet connection.
        1. Connect your Printer to the Computer successfully.
        1. Visit the online Canon’s official website and search for the driver.
        1. Enter the model as ‘Canon G2010’. The screen will display the driver that suits your printer for the Canon G2010 wifi setup.
        1. Click on the download button corresponding to it.
        1. Now, wait for the download process to finish.
        1. Hit the downloaded link to install the drivers on your computer.
        1. Go with the flow of instructions, and click the check box corresponding to ‘Terms and Conditions.
        1. Finally, click on the Finish button to end up the installation process.
        1. You can also download the software and Drivers for Canon G2010 Setup directly from the CD that comes up with the printer.
      Related: Canon mg3122 wireless setup
      Canon G2010 Connect to WiFi
      Next is the connectivity process between the computer and the Printer. After the successful connection, you will be able to print directly using your computer even remotely. You can connect the printer to the network either using a wired connection or wirelessly. Arrange a high-speed network connection and place the router close to the device. Protect it with a secure password to maintain a secure and reliable network. Follow the steps below for Canon G2010 Setup.
          • Firstly, check that your Printer is ON.
          • Move to the ‘Settings’ option using the control panel.
          • Use the Arrow key and navigate to the Device Settings option.
          • Click on the OK button.
          • Again use the Arrow key to navigate to the ‘LAN’ option.
          •  Click on the OK button.
          • Again use the Arrow key to navigate to the ‘Wireless LAN’ option.
          • Click on the OK button.
          • You can also use the ‘STOP’ button to stop the process if it takes much time for its processing, again make the settings.
          • Use the ‘Standard Setup’ option to avoid any waiting processing time.
          • Click on the OK button.
          • Use the arrow keys to move to the ‘WiFi Network’ for Canon G2010 Setup.
          • Click on the OK button
          • Enter the name and password for your network. It then completes the Canon G2010 wifi setup process successfully.
          • Click on the OK button.
          • You can now start printing from your Printer successfully. If you face any issue then you can proceed with the troubleshooting steps to overcome the issue and resolve it.
        You can test the Canon printer Setup process by printing the test page. Give the printing command from your computer that is connected wireless, and check for the success of the operation. Remember to place the paper into the input tray before starting to print.If you’re still having issues with the Canon G2010 setup then get in touch with the Canon printer support team for help.

        Paul Brown

        Paul Brown

        Hi, I am Paul, a blogger, and a huge printer enthusiast. I have 10+ years of experience in the printing industry. Prior to offering my expertise through the digital platform, I worked on resolving almost every printer issue one can imagine. In the past 5 years, I have written numerous guides on paper jams, connectivity issues, and more. I believe that everyone should be able to enjoy the benefits of a well-functioning printer, and I'm here to make that possible. When I not tinkering with printers, I spend my time doing digital art that I'll eventually take a printout of!

        Leave a Comment

        Your email address will not be published. Required fields are marked *

        Canon Pixma TS8050
        Get In Touch