Fix Brother Printer Error Code 0A – Hardware Issue

Last Updated - January 11, 2024

Fix Brother Printer Error Code 0A – Hardware Issue

setup-printerwireless

A very common error that a large number of users face is Brother Printer Error Code 0A. Before attempting to fix the issue, it is important to identify the cause. This pesky hardware issue can be caused by hardware issues such as a faulty power cord, disconnected USB cable, worn-out printhead, or defective components. Here, we will guide you through the troubleshooting process and show you how to fix Printer Error 0A effectively. It is best to start by checking the connection between your computer and Brother Printer. After that, you can follow up with the below-discussed guidelines to resolve the error.

What is Brother Printer Error Code 0A?

The Error Code 0A on your Brother Printer is most likely due to a hardware issue. This error corresponds to a print head problem, meaning the printer is unable to detect or communicate with its printer head. It could be due to a clogged printhead or a disconnected cable. To resolve this error, you will need to inspect the printer’s hardware and attempt to clean the printhead.

Related: Brother Printer Error Code 0B

Common Causes of the Brother Printer Error Code 0A

There are a few common causes of the Error Code 0A on Brother Printers:

Hardware Issue

One of the most common causes of this error code is a hardware issue. There could be something wrong with the printer itself, or with one of the components

Driver Issue

Another possible cause of this error code is an outdated or corrupt driver. Try updating your printer drivers and see if that fixes the problem.

Firmware Issue

In some cases, this error can be caused by corrupted firmware. Try updating your printer’s firmware and see if that resolves the issue.

Dirty Printhead

The printhead on your Brother printer may be dirty and need to be cleaned. This can cause Error Code 0A.

Step-by-Step Troubleshooting Guide for Brother Printer Error Code 0A

If your Brother printer is displaying error code 0A, then you can follow the prescribed steps to fix it and start working with your printer efficiently.

Replacing Hardware Components

If your Brother printer is displaying error code A, it means that there is a hardware issue. To fix this problem, you will need to replace the faulty component. The most common cause of error code A is a defective carriage assembly or print head. To replace these parts, follow the instructions in your printer’s manual. If you do not have a manual, you can usually find replacement parts and instructions online.

Cleaning the Print Head

Another common cause of Brother Printer Error Code 0A is a clogged print head. This can be caused by dirt or ink buildup. To clean the print head, follow the instructions in your printer’s manual. If you do not have a manual, you can usually find cleaning instructions online.

Updating the Firmware

If your Brother printer is still displaying error code A after replacing hardware components and cleaning the print head, it may be due to outdated firmware. To update the firmware, follow the instructions in your printer’s manual. If you do not have a manual, you can usually find firmware updates online.

Reset the Printer

If you’re getting the Brother Printer Error Code 0A, you’ll need to reset your printer settings as follows:

  • Firstly, press and hold the ‘Reset’ button on your Brother printer for 10 seconds.
  • Once the 10 seconds are up, release the ‘Reset’ button and then turn off your printer.
  • Wait 30 seconds before turning your printer back on again.
  • Once your printer is turned back on, try printing again and see if the error code A is still appearing.

Contacting Brother Printer Support

If none of the above steps resolve the issue, then you may need to contact Brother Printer Support for further assistance. They will be able to help you diagnose and troubleshoot any remaining issues.

Related: Brother Printer Error Code 03

FAQs

How do I Fix Unable to Print 0A?

If your Brother printer is displaying the error code “Unable to print 0A,” it means there is a hardware issue with the printer. To fix this, you will need to take the printer to a service center for repairs.

How do I Clear a Brother Printer Error?

Brother Printer Error Code 0A can be due to a hardware issue. Check all of the cables and connections to make sure they’re secure. If you’re using a USB cable, try using a different one. If the error persists, there may be an issue with the printer itself and you’ll need to contact Brother customer support for further assistance.

Why is my Brother’s Printer in Error Status?

If you experience Brother Printer Error Code 0A, it could be due to a hardware issue. To troubleshoot this issue, first, check that all of the printer’s cables are securely connected and that there is no damage to the cables. If the issue persists, try resetting the printer by unplugging it from the power outlet for 30 seconds and then plugging it back in. If the error status continues, contact Brother customer support for further assistance.

How do I Resolve Error Code 0A on my Brother?

Below are some troubleshooting steps that may help resolve the issue:

  1. Check that the printer is turned on and properly connected to the computer.
  2. If the printer is turned on, try restarting the computer.
  3. Try printing from a different program to see if the issue is with the software you’re using.
  4. Check for any loose cables or connections and make sure they are secure.
  5. Try opening and closing the printer’s cover to reset it.
  6. If none of the above steps work, there may be an issue with the printer itself and you’ll need to contact Brother customer support for further assistance on Brother Printer Error Code 0A.

How do I Reset my Printer to Print?

To reset the printer, simply follow these steps:

  1. Turn off the printer and unplug it from the power outlet.
  2. Wait for 30 seconds before plugging the printer back in and turning it on again.
  3. Once the printer is back on, try printing a test page to see if the error has been fixed.

How do I Get my Brother Printer out of Error Mode?

  1. The first thing you should do is unplug the printer from the power outlet and then plug it back in.
  2. Secondly, you should check if the printer is connected to the internet properly and try to reset the connection.
  3. After that, check for any paper jams or other obstructions that may be preventing the printer from working properly.
  4. Also, make sure that all the cartridges are installed correctly and in the right place.
  5. If all of these steps don’t resolve Brother Printer Error Code 0A, then you will need to look at resetting your printer or performing a factory reset.

More Helpful Guides

Paul Brown

Paul Brown

Hi, I am Paul, a blogger, and a huge printer enthusiast. I have 10+ years of experience in the printing industry. Prior to offering my expertise through the digital platform, I worked on resolving almost every printer issue one can imagine. In the past 5 years, I have written numerous guides on paper jams, connectivity issues, and more. I believe that everyone should be able to enjoy the benefits of a well-functioning printer, and I'm here to make that possible. When I not tinkering with printers, I spend my time doing digital art that I'll eventually take a printout of!

Leave a Comment

Your email address will not be published. Required fields are marked *

Services
Canon Pixma TS8050
Get In Touch
Get Human +1-855-934-4292