Troubleshoot and Fix Brother Printer Error Code 8F

ClosePlease login
Last Updated - January 12, 2024

Troubleshoot and Fix Brother Printer Error Code 8F


Error code 8F can be a frustrating issue that can halt your printing tasks. Here, we will guide you through the steps to troubleshoot and fix the Brother Printer Error Code 8F. With our expert tips and tricks, you’ll be back to printing in no time! So let’s dive in and get your printer up and running smoothly again. As an initial step, you can try to restart the printer and then check for the successful resolution of the error. If the issue persists, then follow the below guidelines to configure the cause of the issue and follow up with the desired troubleshooting steps.

Common Reasons for Brother Printer Error Code 8F

There can be several reasons for the error code 8F to occur on your Brother printer. Some of the most common reasons are listed below

  1. The printer is not connected to a power source or the power source is not working properly.
  2. The printer is turned off or in sleep mode.
  3. The printer is not connected to a computer or the connection is loose.
  4. A paper jam has occurred inside the printer.
  5. The print head is dirty or damaged and needs to be cleaned or replaced.
  6. The ink cartridges are empty, clogged, or otherwise damaged and need to be replaced.

Related: Brother Printer Keeps Going Offline

How to Troubleshoot and Fix Brother Code 8F?

If your Brother printer is displaying the error code F, there are a few potential causes and solutions. Perform the steps below to fix the error

Restart the Printer

Here are the steps to follow for restarting the printer

  1. Turn off the printer
  2. Wait a few minutes before turning on the printer again
  3. If the error persists, follow the next step.

Reinstall Printer Drivers

If restarting the printer does not work, you may need to reinstall the printer drivers. Here are the steps to follow for reinstalling printers

  1. Firstly, open Control Panel and go to Devices and Printers
  2. Right-click on your Brother printer and select Uninstall
  3. Download updated drivers from the manufacturer’s website
  4. Install the new drivers following all instructions provided during installation
  5. Once installation is complete, restart both your computer and printer
  6. Check if the error code has been resolved.

Update Printer Firmware

Firmware can sometimes become corrupt due to power surges or other issues, causing errors like 8F to appear on your display screen. To update your firmware

  1. Firstly, go to Brother’s website and download the latest firmware version for your model printer
  2. Save it in a safe location on your computer
  3. Connect your Brother printer to your computer via a USB cable
  4. Launch Brother’s Firmware Update Tool
  5. Follow the instructions provided to complete the update process
  6. Once the update is complete, restart both your computer and printer
  7. Check if the error code has been resolved.

Clean the PrintHead

If the issue persists, you may need to clean the printhead. Here are the steps to follow for cleaning the printhead

  1. Firstly, turn off your printer and unplug it from the power outlet
  2. Open up the front cover of your printer
  3. Locate the printhead and remove it
  4. After that, clean the nozzles with a damp cotton swab or paper towel
  5. Replace the printhead and close the cover
  6. Plug in your printer and turn it on again
  7. Finally, check if the error code has been resolved.

Clean Ink Cartridges

Follow the steps below for cleaning the ink cartridges

  1. Firstly, remove any dried ink on the outside of the cartridge using a dry cloth.
  2. Then, soak a cotton swab in distilled water and use it to clean the electrical contacts on the cartridge.
  3. Finally, dry the contacts with a soft, dry cloth before reinstalling the cartridge in the printer.

Reset to Factory Settings

If none of the above steps work, you may need to reset your printer to factory settings. Here are the steps to follow for resetting your Brother printer

  1. Press the Menu button on your Brother printer
  2. Navigate to Maintenance Menu and select Reset Factory Settings
  3. Confirm the reset process by pressing the OK button
  4. Once the reset is complete, restart both your computer and printer
  5. Finally, check if the error code has been resolved.


How to Reset the Brother Printer?

To resolve Brother Printer Error Code 8F, you will need to reset the printer as follows.

  1. Start by unplugging the printer from the power outlet.
  2. Next, open up the printer’s front cover.
  3. Locate the jam-clear lever and move it to the Jam Clear position.
  4. Close the front cover and then plug the printer back into the power outlet.
  5. Press the Power button to turn on the printer and then try printing again.

How do I clear a Brother Printer Error?

First, try powering off the printer and then powering it back on. If the error persists, try unplugging the power cord from the printer for 30 seconds, then plug it back in.

Else, you’ll need to access the maintenance mode on your Brother printer. To do this, press and hold the Menu button while you power on the printer. Once you’re in maintenance mode, use the up and down arrow keys to navigate to NVRAM RESET and press OK. This will reset all of the settings on your Brother printer and should clear the error code 8F.

How do I Fix my Brother Printer to Print?

First, check that your printer is properly connected to your computer and that all cables are firmly in place. If everything is plugged in correctly and the error persists, try restarting both your printer and computer. If still you are facing an issue, then reach out to the Brother Customer Service team for help.

How do I deep clean my Brother Printer?

Follow the steps below to clean your Brother printer and resolve Brother Printer Error Code 8F

  1. Turn off the printer and unplug it from the power outlet.
  2. Remove all ink cartridges from the printer.
  3. Use a soft, dry cloth to wipe down the inside of the printer, being careful not to touch any electronic components.
  4. Clean the ink cartridges one at a time.
  5. Lastly, plug in your Brother printer and turn it on.

How do you Auto Clean a Printer?

Assuming you have a Brother printer, the first thing you’ll want to do is clean the print head. To do this, open the printer’s control panel and navigate to the Maintenance tab. From here, select the Cleaning option and follow the on-screen instructions.

After that, you may need to perform a deep clean. This can be done by selecting the Deep Cleaning option from the Maintenance tab. Again, follow the on-screen instructions to complete the process.

How do I Fix the 8F Error on my Brother Printer?

If you’re getting Brother Printer Error Code 8F, there are a few things you can try to fix it. Firstly, make sure that the printer is properly connected to your computer. If it is, then try restarting both the printer and your computer.

If that doesn’t work, then you can try uninstalling and reinstalling the Brother printer drivers on your computer. To do this, go to the Brother website and download the latest drivers for your model printer. Then, follow the instructions on how to uninstall the old drivers and install the new ones.

More Helpful Guides

Paul Brown

Paul Brown

Hi, I am Paul, a blogger, and a huge printer enthusiast. I have 10+ years of experience in the printing industry. Prior to offering my expertise through the digital platform, I worked on resolving almost every printer issue one can imagine. In the past 5 years, I have written numerous guides on paper jams, connectivity issues, and more. I believe that everyone should be able to enjoy the benefits of a well-functioning printer, and I'm here to make that possible. When I not tinkering with printers, I spend my time doing digital art that I'll eventually take a printout of!

Leave a Comment

Your email address will not be published. Required fields are marked *

Canon Pixma TS8050
Get In Touch